Fitting a working Bluetooth system to a K1600 GT / GTL The Bluetooth system on the K1600 GT / GTL is almost non-functioning, unless you happen to own
Problems with the system: There are no really big problems with this system, but you should be aware of the following when going this route: Using WI
Parts Required: To begin with, I fitted an Autocom Super Pro Automatic with a bunch of Bluetooth modules to the K,(mine is the GTL, but it is exactly
Fitting the 2275 Switch Your first job will be to fit the Speaker switch to the RH panel, just under the Powerlet socket. NOTE: You can place the swi
jack plug cable underneath the Alpine unit to mate up with the Autocom SPA. Once you have completed the cable runs and cable tied all the new cables
Connecting the RH speaker to the Autocom: You can either: Strip a section of the RH negative speaker wire (Blue / Red Stripe) and solder the white wi
Powering the Autocom. Bring the Red positive wire from the Autocom, towards the back of the passenger seat area and locate the large round plug clip
Testing the System: Power up the bike now and turn on the stereo with the volume up slightly. Toggle the 2275 switch one way or the other to see if y
Kommentare zu diesen Handbüchern